Panasonic DP-C265

38
Chapter 3 Copier Settings
30 - 39 30 Colour Spec(Overlay) Set the default overlay uolour.
z “Preset 1 to 6” can be
selected when you set “20
Add User Colour” in the
Copier Settings.
Full, Red, Magenta,
Green, Cyan, Blue,
Black, Yellow, White,
Preset1, Preset2,
Preset3, Preset4,
Preset5, Preset6
Full
31 Mono Colour Judge Level Set the auto detection level for
colour original.
1: Making an original easier to
detect as monochrome.
7: Making an original easier to
detect as coloured.
1 to 7 4
32 Colour Toner Save(T) In the Colour mode, set the level
of toner saving when the original
type is “ Text ”.
None, Level 1, Level
2, Level 3, Level 4,
Level 5
None
33 Colour Toner Save(T/P) In the Colour mode, set the level
of toner saving when the original
type is “ Text/Photo ”.
None, Level 1, Level
2, Level 3, Level 4,
Level 5
None
34 Colour Toner Save(P) In the Colour mode, set the level
of toner saving when the original
type is “ Photo ”.
None, Level 1, Level
2, Level 3, Level 4,
Level 5
None
35 Colour Toner Sve(Other) In the Colour mode, set the level
of toner saving when the original
type is “ Other Types ”.
None, Level 1, Level
2, Level 3, Level 4,
Level 5
None
36 Mono Toner Save(T) In the Monochrome mode,
set the level of toner saving when
the original type is “ Text ”.
None, Level 1, Level
2, Level 3, Level 4,
Level 5
None
37 Mono Toner Save(T/P) In the Monochrome mode,
set the level of toner saving when
the original type is “ Text/Photo ”.
None, Level 1, Level
2, Level 3, Level 4,
Level 5
None
38 Mono Toner Save(P) In the Monochrome mode,
set the level of toner saving when
the original type is “ Photo ”.
None, Level 1, Level
2, Level 3, Level 4,
Level 5
None
39 Mono Toner Save(Other) In the Monochrome mode,
set the level of toner saving when
the original type is “ Other Types ”.
None, Level 1, Level
2, Level 3, Level 4,
Level 5
None
40 - 44 40 Copy Customise Set whether to indicate the More
Menus functions individually.
41 Reserve a Job Settings Set whether to clear to save the
copy job setting of reservation.
Save, Clear Clear
No. 32 to 39
After setting any of these parameters, turn the
machine’s power switch Off,
and then On again.
Key Operator Mode
No. Parameter Comments Selective Item
Standard
Setting