Panasonic DP-C405

Installation
23
The Wizard automatically searches
for machines connected to your
network, and displays the found units
in the Network Fax Device window.
Select your Network Fax, and then
click “Next”.
5
Select “I accept the terms of the
license agreement”, and then click
“Next”.
● Make sure that your machine is connected
to the network properly, and the Power
Switch is ON before clicking “Next”.
6
Click “Next”.
7
● The above screen will not be shown if
there is another model’s Panasonic
Document Management System
installed.
Click “Next”.
8
● The above screen will not be shown if
there is another model’s Panasonic
Document Management System
installed.
● Only the machines connected to the same
subnet can be used as a network printer.
● If your machine has not been connected to
the network yet, enter its allocated IP
Address, and then click “Next” to proceed
with the installation.
Continued on the next page...
1
2
21