Panasonic DP-C405

Setting up
35
Network Scanner Settings
■■
■■
■ Setting up the Scanner Configuration Using the Communications Utility
3
1
2
1
2
2
1
Refer to the right column.
Click “OK”.
Right-click “Panasonic
Communications Utility” icon on
the task bar, and then select
“Scanner Configuration...”.
Click “Add Device” if your PC address
information is registered in the machines
located on the different subnet.
Click “Add”.
Enter the
machine’s
Device
Name, and
IP Address.
Click “OK”.
Click “OK”.
1
4
2
3
● Name and Key Name are automatically displayed
according to your PC’s network setting.
Name: Computer name
Key Name: Network login user name
Select “Auto Registration”, and
then enter the Name and Key
Name to be saved into the
machine. (Up to 15 characters)
4
3
2
1