Panasonic DP-C405

34
Setting up
■■
■■
■ Setting up the Completion Notice
Ex: Print Job
The Job Status Utility software will display the pop-up Completion Notice
on your PC screen when finishing the Print, PC Fax, Copy, and Fax jobs.
The information displayed in the Completion Notice vary according to the
type of job being performed.
Completion Notice Function
1
Install the Job Status Utility located
on the Panasonic Document
Management System CD-ROM.
(See pages 8 to 12)
2
Confirm that the Panasonic Job
Status Utility icon is shown on
the task bar.
3
For PC Fax, and PC Print only
Set up the Completion Notice as
described in the column on the right.
For Copy, Fax, and Internet Fax only
● Refer to Setting up the Scanner
Configuration using the Communications
Utility.
(See page 35)
Select your PC on the Touch Panel Display
of the machine. Refer to the Completion
Notice of each relevant Operation
Instructions of provided CD-ROM.
Basic Procedures:
● If the Job Status Utility icon is not
shown on the task bar, select “All
Programs”
→→
→→
→ “Panasonic”
→→
→→
→ “Job Status
Utility”
→→
→→
→ “Job Status Utility” to activate
the Job Status Utility icon.
Panasonic Job Status Utility Icon
Right-click the Panasonic Job
Status Utility icon on the task
bar, and select “Setup” from the
menu.
Setting up for PC Fax and PC Print:
Select the display condition for the
Setup window, and then click
“OK”.
All : Always displays after each
transmission or print job.
Error only : Displays only when an error
occurs.
None : Does not display.
1
Panasonic Job Status Utility Icon
2
12