42
■ Setting up the User Parameters
● When the machine is not connected to the network (LAN), change the DHCP Default setting to “No”. (See
pages 4 to 5)
1
Press the Function key.
2
Select “Fax/Email Settings”.
3
Select “04 Key Operator Mode”.
4
5
Select “00 User Parameters”.
Enter the Key Operator’s password
(8 digits), and then select “OK”.
Facsimile Settings (Option)
● The default password is “00000000”.
To change the password, select “85 Key
Operator Password” in the General
Settings (Key Operator Mode), and then
enter the new password.
Setting up Optional Accessories
1 2
To Next Page
Loading...
