Panasonic Eco Solutions Nordic AB
MEW01622 Rev: - EBL128 Planning Instructions V2.0.x
153
19.3 User definable text messages download
Each alarm point, zone and zone line input can have a unique user
definable alarm text programmed via EBLWin. When a fire alarm is
activated (e.g. an addressable alarm point), the presentation number
(Zone - Address) will be shown in the control unit display and in the
ext. FBP 1826 / 1828 display
together with its alarm text.
All alarm texts, up to 40 alphanumeric characters each, are created and
downloaded (included in the site specific data – SSD) via EBLWin.
When a printer is available (e.g. in an Ext. FBP 1826) the alarm text
will be printed with the presentation number.
A fault message for an alarm point, zone or zone line input will also
show the alarm text.
This is also valid for the Ext. Presentation unit 1728 and the Alert
Annunciation units 1735 / 1736.
To Next Page
Loading...
