Panasonic Eco Solutions Nordic AB
MEW01622 Rev: - EBL128 Planning Instructions V2.0.x
16
o A socket for an optional Communication module (RS485
transceiver component) 4552, which will provide an RS485
interface (serial line) for up to eight Display Units (1735 /
1736 and/or 1826 / 1828 and/or 1728). Max. one 1826 with
printer. Connections and more information, see drawing 128-
23.
On the RS485 serial line can as an alternative, up to eight
German Fire Brigade Control Panels (Feuerwehr-Bedienfeld)
FBF 2003
and/or German Fire Brigade Indicator Panels
(Feuerwehr-Anzeigetableau) FAT 2002
3
be connected.
o RS232 interface ("D" connector) for a PC with EBLWin.
Connections and more information, see drawing 128-25.
o RS232 interface for a Web-server 1598. Connections and more
information, see drawing 128-25.
o 24 V DC power supply output for a Web-server 1598.
Connections and more information, see drawing 128-25.
Built-in power supply (rectifier) and space for back-up batteries.
Connections and more information, see drawing 128-24.
Space for optional expansion board holder (Expansion boards
mounting kit 4551). Up to four expansion boards can be
mounted in the holder.
Space for routing equipment.
DIN-rail (and space) for a Web-server 1598.
Cable inlets (rubber grommet / knock-outs) on the top, bottom and
back sides.
The door has a Plexiglas ahead of the front, see Figure 1. A key is
required to open the door to get full access to the push buttons on the
front, i.e. the Fire Brigade Panel (FBP) and the Control Panel (CP).
Figure 2. The EBL128 front. The look might vary depending on
the country (language), configuration, etc. (e.g. English texts as
in the figure). LEDs & push buttons are described in the
EBL128 Operating Instructions.
Manufacturer: IFAM GmbH, Erfurt, Germany. www.ifam-erfurt.de
To Next Page
Loading...
