Panasonic FP-7818

5-29
Troubleshooting
(6) F7 mode electronic counter
Read procedure
Set the copier to service mode and press Multi-Copy key “7”.
Press Print key.
Select the desired code number with Multi-Copy key.
Indicates memorized count in the electric counter.
Press Clear/Stop and User Preset key to escape service mode.
Code Item Function
00 A code No. of specific Identification code number for access counter of user choice
department manager mode
01 - 20 Not used
21 Total count Total count of all copies
22 Preventive maintenance PM count of all copies.
total count NOTE: When the service call indicator turns ON, the PM count
is cleared.
23 Developer count Total elapsed copies since the last developer change.
24–25 Not used
26 Fuser cleaning web count Possible number of copies until replacement of web roller.
27 - 32 Not used
33 ADF original feed total count Total count of originals fed.
34 Duplex unit copy total count Total count of duplex unit copies.
35 Sheet bypass count Total count of sheet bypass paper fed.
36 Copier lower paper drawer Total count of copies from the lower drawer of the copier.
count
37 System console upper Total count of upper stage of optional system console.
paper drawer count
38 System console middle Total count of upper stage of optional system console.
paper drawer count