5-16
(4) F5 mode Copier function programming
Set the copler to service mode and press Multi-Copy key “5”.
Press Print key.
Select desired code number with touch panel display and touch the OK key.
If you wish to select other code number, scroll the menu with arrow keys ( ).
Select desired function with touch panel display and touch the OK key.
When the CANCEL key is touched, the desired code input will not be accepted.
Press Clear/Stop and User Preset key to escape service mode.
Code Item Function (Factory setting)
0 Country version 0: Japanese
1: North American 1 (for American)
2: European/Others 2 (for European)
1 Frequency desired 0: 50 Hz 0 (for European)
1: 60 Hz 1 (for American)
2 Auto reset timer 0: None 1: 45 second 2
2: 1 minute 3: 2 minute
3 Energy saver timer 0: 15 m 1: 30 m 2: 60 m 0 (for American)
3: 1.5 h 4: 2 h 5: 3 h 7 (for European)
6: 4 h 7: No energy saver timer
4–6 Not used
7 Message display 0: Japanese 5: Spanish 1
language change 1: English 6: Swedish
(Except FP-7818/7824) 2: German 7: Finnish
3: French 8: Dutch
4: Italian 9: Portuguese
8 Not used
9 Fuser lamp phase 0: Zero cross control 0
control 1: Phase control
10 Optics cooling fan control 0: Normal operation 1
1: Control mode
(Fan operates when a predetermined
amount of copies are made.)
11 Copy reservation function 0: Not detecting 1
1: Detecting
12 Not used
To Next Page
Loading...
