Panasonic FP-7818

5-17
Troubleshooting
Code Item Function (Factory setting)
13 Auto off timer 0: No auto off timer 0 (for European)
1: 30 m 2: 60 m 1 (for American
3: 1.5 hr 4: 3 hr FP-7818)
5: 4 hr 2 (for American
FP-7824/7830/
7835)
3 (for American
FP-7845/7850)
14 Copy paper size setting 0: None 1: Ledger/A3 1
(copier paper tray upper) 2: Legal/B4 3: Letter/A4
4: Letter - R/A4R 5: Invoice/A5
15 Copy paper size setting same as F5-14 1
(copier paper tray,lower)
16 Copy paper size setting same as F5-14 0
(System console, upper)
17 Copy paper size setting same as F5-14 0
(System console, middle)
18 Copy paper size setting same as F5-14 0
(System console, lower)
19 Not used
20 ADF 0: Cancellation of ADF 1
(Automatic document 1:ADF installation automatically
feeder) discriminated
21 Sorter 0: Cancellation of sorter 1
1: Sorter installation automatically
discriminated
22 System console 0: Cancellation of system console 1
1: System console installation
automatically discriminated
23 LCC 0: Cancellation of LCC 0 (FP-7818/7824)
(3000 sheet paper tray) 1:LCC installation automatically 1 (FP-7830/
7835/
discriminated 7845/7850)
24 Not used
25 Copy density sensor read* 0: Not detecting 1
1: Detecting
26 Duplex unit 0: Cancellation of duplex unit 0 (FP-7818)
1: Duplex unit installation 1 (FP-7824/7830/
automatically discriminated 7835/7845/7850)
27 Total copy count 0: Does not count up 0
(Except FP-7818) 1: Count up
In case of mis-feed in
second side copy for
two side copy, copy number
is/not counted.
* (for Qualitative Reasoning Based Adaptive Controller)