4-8
(1) Multi-feed bypass
Part name
1 Pick up roller 120K
2 Paper feed roller 120K
3 DFP roller 120K
4 Torque limiter 1200K
5 Registration roller 1080K
6 Registration roller 1080K
bearing
7 Cleaning sheet 600K
Item Cycle
4
3
2
1
5, 6
7
Caution
Magnet clutch
Welded point
Welded point
“D” cut
Hook
Hook
“D” cut
When removing the magnet clutch, push the hook 1 , out of the slot and slide
the magnet clutch in the arrow direction
2 , in order to avoid welded point
damage.
(Side view)
(Front view)
To Next Page
Loading...
