Panasonic FP-7818

6-2
6.4 Installation Procedure
• Remove the external packing/protection materials.
• Remove the shipping tape from the copier.
• Save the shipping materials for future use (Transport of copier)
Location Shipping material/Procedure Check
1
1. Optical unit
(1) Remove the original guide plate.
(3 screws)
(2) Remove the optical unit shipping
brackets (front/rear) (1 screw
each).
(3) Remove the platen glass.
(4) Remove the lens unit fixing bracket
B. (1 screw)
(5) Reinstall the platen glass.
(6) Reinstall the original guide plate.
2. Duplex unit
(1) Open the waste toner bottle cover.
(2) Remove the waste toner bottle.
(3) Remove the tape and duplex unit
bracket.
(4) Pull the duplex unit tray out fully.
(5) Remove the paper guide shipping
screws. (2 screws)
(6) Raise the paper guide.
(7) Remove the shipping styrofoam.
(1 piece)
(8) Slide back the duplex unit tray.
3. 550 sheet paper drawer
(1) Pull the 550 sheet paper drawer
out fully.
(2) Remove the shipping styrofoam.
(1 piece)
(3) Slide back the paper drawer.
Styrofoam
Duplex unit
(5)
(5)
(3)
(4)