Panasonic FP-7818

5-40
Jam
Jam
read Condition
code
position
J00 The registration roller paper pass sensor does not detect A
paper within a predetermined time after sheet bypass paper feed
roller starts rotating.
J01 The copier upper paper feed unit paper pass sensor 1 does not
detect paper within a predetermined time.
When the duplex unit is not installed: A
After copier upper stage paper feed roller starts rotating.
When the duplex unit is installed: A, E
After duplex unit paper feed roller starts rotating.
J02 The copier lower paper feed unit paper pass sensor 2 does not A
detect paper within a predetermined time after copier lower stage
paper feed roller starts rotating.
J03 Optional system console upper paper feed unit paper pass sensor 1 B
does not detect paper within a predetermined time after upper
stage paper feed roller starts rotating.
J04 Optional system console middle paper feed unit paper pass sensor 2 B
does not detect paper within a predetermined time after middle
stage paper feed roller starts rotating.
J05 Optional system console lower paper feed unit paper pass sensor 3 B
does not detect paper within a predetermined time after lower
stage paper feed roller starts rotating.
J06 When optional LCC is installed. A
The copier lower stage paper pass sensor 2 does not detect paper
within a predetermined time after LCC pick-up roller starts
rotating.
J07 Paper feeding from the copier lower paper tray or optional A
LCC or system console:
The copier upper stage paper pass sensor 1 does not detect paper
within a predetermined time after copier lower stage paper pass
sensor detected paper.
J08 Paper feeding from the optional system console upper stage: A, B
The copier lower stage paper pass sensor 2 does not detect paper
within a predetermined time after optional system console upper
stage paper pass sensor 1 detected paper.
J09 a) Paper feeding from the optional system console middle stage: B
The copier lower stage paper pass sensor 2 does not detect paper
within a predetermined time after optional system console middle
stage paper pass sensor 2 detected paper.
b) Paper feeding from the optional system console lower stage:
The copier lower stage paper pass sensor 2 does not detect paper
within a predetermined time after optional system console lower
stage paper pass sensor 3 detected paper.
J10 Not used
J11 The copier upper stage paper pass sensor 1 is detecting paper within
a predetermined time.
a) Paper feeding from copier upper stage: A
b) Paper feeding from duplex unit: A, E
2. Paper Jam