1-1
Introduction
1.2 Features
Following modes can be selected by pressing the key on the panel of the copier.
• Staple Mode: Copies discharged into bins will be stapled automatically (when
using the ADF)
• Group Mode: Copies of the same page will be grouped and stacked separately
from copies of other pages.
• Sort Mode: Copies of multiple page documents will be sorted.
• Stack Mode: Copies will be received by other 20 bins starting from bin No.1
(After 75 copies enter the stack tray in excess of 100).
Section I Introduction
Number of bins 20 bins
1.1 Specifications
Operating
Conditions
Specifications
Copy Size Ledger/A3, Legal/B4, Letter/A4, Invoice/A5
Copy paper weight 16 - 24 lb / 64 - 80g/m
2
Manual staple capacity 2-50 copies (25 copies: A3/B4) (20lb / 80g/m
2
)
Dimensions(W x D x H) 17.1" x 23.3" x 23.5" / 434 x 594 x 624 mm
Weight Approximately 44 lb / 20kg
Less than 100 copies: 100 per pin
More than 100 copies: 30 (25) per pin of 20
When more than 100 copies are selected, the balance of the copies requested
are stacked into the sort bins, starting from bin 1, up to 30 (25) copies into each
bin before shifting to the next bin.
(This means a maximum of 600 (A4, A5)/500 (A3, B4) copies can be made
before "oF" appears---A4, A5: 30 X 20 A3, B4: 25 X 20
Stack 30 (25)
Sort
50 (30, S620: 25/Legal-B4, 15/Ledger-A3)
Staple
50 (30, S620: 25/Legal-B4, 15/Ledger-A3)
Group 30 (25)
Bin Capacity
(when recommended
paper is used)
•
(Numbers in ( ) are for
Ledger/A3, Legal/B4 paper)
Ambient conditions 59 - 86 F / 15-30 °C (standard: 68 F / 20°C)
Relative humidity 20-80% (standard: 60%)
Power source DC+24V (supplied from copier)
Installation condition Horizontal
To Next Page
Loading...
