1-15
Introduction
1. 7 Precautions on Set Up
Copy machine performance and the copy quality is subject to and dependant
on environmental conditions. To maintain good performance, quality, and safe
operation, observe the following precautions:
1) For safe operation and to avoid trouble do not install the system under the
following conditions:
• High temperature, high humidity, low temperature or low humidity
• The temperature or humidity varies suddenly
• Being exposed to direct sunlight
• Dusty space
• Badly ventilated location
• Exposed to chemical gases (such as ammonia gas)
• Exposed to strong vibration
• Directly exposed to direct wind (ex. outlet of air conditioner)
2) The weight of machine is 220lb(100 kg) or more with options. It must be placed
on a firm platform which is level.
3) The maximum power consumption is 1.45 kW. Use an independent power
supply of 120 V and 15 A (220-240V and 7A)or higher. (Do not use a extension
cord.)
4) Make sure the machine is properly grounded. (Do not ground to gas or water
pipe.)
• A ground terminal is provided on the back of the copier main body.
5) Install the machine with enough space around it.
4"/100 mm
14"/350mm
28"/700mm
Copier
Multi sheet bypassExit tray
To Next Page
Loading...
