Panasonic FP-7818 - Page 68

4-28
SV632
SV630
9
12
Remove the optics cover.
(1)Disconnect the 2 connectors.
(2)Remove the 2 screws.
10
(1)Remove the ADF lattice connector bracket
(5 screws).
(2)Remove the optics motor tension spring.
(3)Remove the left ADF hinge receiving
bracket/key counter receptacle bracket (3
screws).
(4)Remove the optics drive motor (3 screws).
(5)Remove the optics drive motor belt.
11
Remove the right hinge receiving bracket (2
screws).
Remove the left side control panel ass’y
bracket. (1 screw).
1
2
1
4
4
5
3
3
2
2
1