4-36
1) Replacement of the charger wire/wire cleaner felt
(1)Open the front cover.
(2)Turn the transport lever and lower the
transport unit.
(3)Press down the transfer charger and draw
it toward you.
1
• Remove the transfer corona.
(1)Remove the paper guide.
(2)Remove the charger cover.
(3)Replace the transfer wire cleaner felt.
Note: When the transfer charger is installing,
slide the wire cleaner felt to rear side
until it stops.
2
• Replace the transfer corona wire and the
separation corona wire with new one.
(1)Remove the corona wire spring.
(2)Unfasten the corona wire.
3
2
3
2
1
3
2
1
1
To Next Page
Loading...
