Panasonic FP-I4C - Remove the Unit from a DIN Rail; Install the Unit on a Slim Type Mounting Plate

2 Installation
2. Without moving the upper hook, press on the lower hook to fit the FP-I4C unit into
position.
1
2
(2)
(1)
(1) Mounting panel
(2) DIN rail
2.5 Remove the unit from a DIN rail
You can easily remove the FP-I4C unit from a DIN rail with a slotted screwdriver.
1. Insert a slotted screwdriver into the DIN rail attachment lever.
2. Pull the attachment lever downwards.
3. Lift up the FP-I4C unit and remove it from the rail.
3
2
1
(2)
(1)
(1) DIN rail
(2) DIN rail attachment lever
2.6 Install the unit on a slim type mounting plate
To attach the unit directly to the wall, you can use a slim type mounting plate, which can be
ordered separately.
Use M4 size pan-head screws to attach the FP0 slim type mounting plate (AFP0803) to the
mounting panel.
FP-I4C 19