Panasonic FP-I4C - Add FP0;FP0 R Expansion Units to the FP-I4 C Unit

2 Installation
3. Align the expansion hooks with the plate and press the hooks back down.
FP-I4C
RS232RS232/RS485
USB1
USB2
ETH1
ETH0
S R
G1
F1 F2
S/- R/+
S/- R/+
S/- E
G2 G2
G1
2
1
3
3
1
Note
An FP-I4C unit with an attached FP0 flat type mounting plate can also be installed
sideways on a DIN rail.
FP-I4C
RS232
RS232/RS485
USB1
USB2
ETH1
ETH0
S
R
G1
F1
F2
S/-
R/+
S/-
R/+
S/-
E
G2
G2
G1
2
1
(2)
(1)
(1) DIN rail
(2) FP0 flat type mounting plate AFP0804
2.8 Add FP0/FP0R expansion units to the FP-I4C unit
The FP0/FP0R expansion units are connected on the right side of the FP-I4C unit.
1. Raise the expansion hooks on the top and bottom sides of the unit with a screwdriver.
FP-I4C 21