Safety precautions
Safety precautions
Observe the following notices to ensure personal safety or to prevent accidents. To ensure
that you use this product correctly, read this User’s Manual thoroughly before use. Make
sure that you fully understand the product and information on safety.
• Always take precautions to ensure the overall safety of your system, so that the whole
system remains safe in the event of failure of this product or other external factor.
• Do not use this product in areas with inflammable gas. It could lead to an explosion.
• Exposing this product to excessive heat or open flames could cause damage to electronic
parts.
• To prevent abnormal exothermic heat or smoke generation, do not use this product
continuously at the maximum performance values listed in the specifications.
• Do not disassemble or modify the product. It could lead to abnormal exothermic heat or
smoke generation.
• Do not touch the terminals while the electricity is turned on. It could lead to an electric
shock.
• Use external devices to ensure safety related functions such as the emergency stop and
interlock circuit.
• Connect the wires and connectors securely. A loose connection might pose an electrical
hazard, which could result in a short-circuit, exothermic heat or smoke generation.
• Do not allow foreign matter such as liquid, flammable materials, metals to enter the
product. It could cause excessive exothermic heat or smoke generation.
• Do not undertake construction (such as connection and disconnection) while the power
supply is on. It could lead to an electric shock.
FP-I4C 5
To Next Page
Loading...
Need help?
General
