Panasonic FP-I4C - General Installation Steps

2 Installation
(3)
(2)
(1)
[mm]
6.0
60.0
(1)
FP0 slim type mounting plate AFP0803
(2)
Screw
(3) Mounting panel
1. Fit the upper hook of the FP-I4C unit onto the FP0 slim type mounting plate.
2. Without moving the upper hook, press on the lower hook to fit the FP-I4C unit into
position.
2
1
2.7 Install the unit on a flat type mounting plate
To attach the unit sideways, you can use a flat type mounting plate, which can be ordered
separately.
Use M4 size pan-head screws to attach the FP0 flat type mounting plate (AFP0804) to the
mounting panel.
AFP0804
[mm]
(3)
(2)
(1)
60.0
(1)
FP0 flat type mounting plate AFP0804
(2)
Screw
(3) Mounting panel
1. Raise the expansion hooks on the top and bottom of the unit.
2. Install the FP-I4C unit on the FP0 flat type mounting plate.
20 FP-I4C