3 Wiring
3.4 Wire the power supply
Use the power supply cable (AFPG805) that comes with the unit to connect the power
supply.
(5)
(3)
(4)
(2)
(1)
(1)
Power supply connector
(2)
Power supply cable (AFPG805)
(3)
Brown: 24V DC
(4)
Blue: 0V
(5)
Green: must be connected to frame ground
The FP-I4C unit will turn on as soon as the power supply has been connected. The green
LED PWR will turn on after self-test.
When connecting the power supply (class 2 circuit), make sure the polarity (+/-) is correct.
If you connect an FP0/FP0R expansion unit, this unit and the FP-I4C unit must be supplied
by the same power supply.
Related topics
General installation procedure (page 16)
FP-I4C 25
To Next Page
Loading...
