- 125 -
(For tethering connection)
Check if your smartphone is compatible with the tethering function.
2 Acquire a USTREAM ID/Password/Program on the smartphone or PC (l 127).
3 Acquire a “LUMIX CLUB” ID/Password. (l 127).
4 Configure the USTREAM broadcast settings on the “LUMIX CLUB” (l 127).
When the preparation above is complete, proceed to “Connecting to a wireless access point”
(l 128).
1 Check if the wireless access point is compatible with IEEE802.11b, IEEE802.11g, or
IEEE802.11n.
2 Install the smartphone application “Image App” on your smartphone. (l 126)
3 Check if the smartphone is an Android (NFC-compatible), Android (non-NFC-compatible), or
iOS device
≥ If a message asking you to touch the NFC mark on the device is displayed when starting up the
“Image App”, you can connect using NFC.
When the preparation above is complete, proceed to “Connecting to a wireless access point”
(l 128).
[Hom.Monitor] You can confirm the recording screen of this unit from outside using a
smartphone.
Caution:
This function is not designed for anti-theft or disaster use.
To Next Page
Loading...
