- 142 -
Connecting this unit to a DLNA-compatible TV via Wi-Fi, you can play back scenes and still pictures
on the TV.
A DLNA-compatible TV
1 Press Wi-Fi button.
2 Touch [DLNA Play].
≥ If you touch [Change AP], you can switch the wireless access point to another one that has been
registered to this unit.
≥ If you touch [CANCEL], the Wi-Fi connection is cancelled.
≥ When the connection is complete, the screen of this unit turns off. To display it again, touch the
screen.
3 Select this unit (SSID) by the TV side.
≥ Select the media (SD/MEM) and select the motion picture (AVCHD) or still picture (JPEG) to play
back.
4 Perform playback operations with the TV remote
control.
≥ Playback operations may differ depending on the TV in use.
≥ The following operations can be performed if a colour button is
pushed.
Blue/Red: Skip playback
≥ Fast forward/Fast rewind playback cannot be performed.
≥ You cannot perform playback operations with this unit.
To exit the playback on the TV:
Touch [EXIT] or press Wi-Fi button.
A message is displayed. Touch [YES] to exit.
≥ Scenes recorded in iFrame/MP4 cannot be played back.
≥ Depending on the TV used, it may not playback in AVCHD picture quality even when the scene
recorded in AVCHD is played back.
Wi-Fi [HC-V720]/[HC-V727]/[HC-V720M]
Playing back on a TV
≥ Before using, perform the preparations for using the Wi-Fi function. (l 124)
≥ Please read the operating instructions for the TV about connecting TV to the wireless
access point.
≥ Do not remove the SD card in playing back on a TV.
(Examples of operations
during motion picture
playback)
A Skip playback
B Stop
C Playback/Pause
To Next Page
Loading...
