EasyManua.ls Logo

Panasonic HC-V727 - Recording motion pictures

Panasonic HC-V727
192 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 21 -
1 Change the mode to .
2 Open the LCD monitor.
3 Press the recording start/stop
button to start recording.
A Recording button icon
B When you begin recording, ; changes to
¥.
4 Press the recording start/stop
button again to pause recording.
Recording can also be started/stopped by touching the recording button icon.
Screen indications in the Motion Picture Recording Mode
Screen display will disappear when no touch operation is performed for a specific period of time.
To display it again, touch the screen. (l 31)
It will be constantly displayed when the remaining recordable time becomes less than 30 minutes.
Basic
Recording motion pictures
Recording mode
R 1h20m
Approximate remaining recordable time
When the remaining time is less than
1 minute, R 0h00m flashes red.
0h00m00s
Recording time elapsed
“h” is an abbreviation for hour, “m” for
minute and “s” for second.
Each time the unit is put into recording
pause, the counter display will be
reset to 0h00m00s.
T
W
0h00m00s0h00m00s0h00m00s
R 1h20mR 1h20mR 1h20m

Table of Contents

Other manuals for Panasonic HC-V727

Related product manuals