- 38 -
The used space and remaining recordable time of the SD card and built-in memory can be checked.
≥
Touching [CHANGE MEDIA] switches the unit between the display for the SD card and the
display for the built-in memory.
≥ When the mode switch is set to , remaining recordable time for the selected recording mode
is displayed.
≥ Touch [EXIT] to close the indication.
≥ The SD card or built-in memory requires some space to store information and manage system
files, so the actual usable space is slightly less than the indicated value. The usable SD card/built-
in memory space is generally calculated as 1 GB=1,000,000,000 bytes. The capacities of this
unit, PCs and software are expressed as 1 GB=1,024k1,024k1,024=1,073,741,824 bytes.
Therefore, the indicated value of the capacity appears to be smaller.
The firmware version of this unit is displayed.
You can update the firmware version of this unit.
[MEDIA STATUS]
: [SETUP] # [MEDIA STATUS]
[Version Disp.]
: [SETUP] # [Version Disp.]
[Version Up]
: [SETUP] # [Version Up]
For the latest update information, check the support website below. (As of December
2012)
http://panasonic.jp/support/global/cs/e_cam/
(This Site is English only)
MENU
MENU
MENU
To Next Page
Loading...
