68
VQT3K43
This will reduce the wind noise coming into the built-in microphones while maintaining the
realism.
≥ Switch to manual mode. (l 76)
≥ This function’s default setting is [ON].
≥ When switching to intelligent auto mode, [WIND NOISE CANCELLER] is set to [ON], and
the setting cannot be changed.
≥ You may not see the full effect depending on the recording conditions.
Directivity of the microphone is interlocked with the zoom operation. Sounds near the front of
the unit are recorded more clearly if you zoom in (close-up) and surrounding sounds are
recorded more realistically if you zoom out (wide angle).
≥ Switch to manual mode. (l 76)
[WIND NOISE CANCELLER]
: [RECORD SETUP] # [WIND NOISE CANCELLER] # [ON]
[ZOOM MIC]
: [RECORD SETUP] # [ZOOM MIC] # [ON]
MENU
MENU
HDC-SD800EB_eng.book 68 ページ ２０１０年１２月２４日 金曜日 午前９時９分
To Next Page
Loading...
