Panasonic HDC-SD800 - Functions Not Available During 3 D Recording

82
VQT3K43
∫ Functions that cannot be used during 3D recording
When recording with the 3D Conversion Lens, you cannot use certain functions.
Functions not available during 3D recording
*1 The zoom position is fixed, and the zoom operation is disabled.
*2 The optical image stabilizer and optical image stabilizer lock can be used.
*3 Intelligent auto mode is cancelled.
*4 The 1080/50p recording mode is cancelled, and the video is recorded with AVCHD picture
quality.
*5 Only white balance can be used.
Touch to display the manual icon.
(Button/lever operations) (Recording functions)
jZoom in/out function
*1
jHybrid optical image stabilizer
*2
jIntelligent auto mode
*3
j1080/50p recording
*4
jStill picture recording (Still Picture
Recording Mode, and still picture
recording in Motion Picture
Recording Mode)
jManual operations
*5
(focus, shutter
speed, iris)
j[EXT DISPLAY] (remote control)
jAF/AE tracking
jiFrame ([REC MODE])
jIntelligent contrast control
jSmile shot
jSoft skin mode
jTel e m ac ro
jGuideline
jColour night view
jScene mode
jDigital cinema
jFace recognition
jDigital cinema colour
jZoom microphone
jPicture adjust
jLuminance
jHistogram
(Setup menu)
jQuick power on
jQuick start
jInitial set
HDC-SD800EB_eng.book 82 ページ ２０１０年１２月２４日 金曜日 午前９時９分