VQT3N87 87
Disassemble after the battery runs out.
≥ Using a driver (optional), disassemble in the following sequence.
≥
If it cannot be removed smoothly, contact
Panasonic’s Service Center.
≥ Keep disassembled parts out of reach of children.
1 Remove all screws shown in the figure.
( : 9 screws, : 7 screws)
≥ Use a Phillips screwdriver (optional) to remove screws.
How to remove the battery
This figure describes the disposal of the unit, it is not instruction
for repair. If disassembled, repair is not possible.
HM-TA20
HM-TA2
HM-TA20&TA2_P&PC-VQT3N87_mst.book 87 ページ ２０１１年４月２２日 金曜日 午後１２時１１分
To Next Page
Loading...
