VQT4F67 101
≥ The higher the ISO sensitivity, the greater the capability of the unit to
record with fast shutter speeds and in dark environments. However, a
higher sensitivity may also mean more noise in the recorded image
and a more grainy image.
≥ [SCENE MODE] will be set to (OFF) when the [ISO] is set to other
than AUTO while the [SCENE MODE] (l 90) is set to
(FIREWORKS), (HDR (Backlight Comp.)), (HANDHELD
NIGHT SHOT) ( only), or (LOW LIGHT).
≥
Slow Motion Mode (l 81) is set to off.
≥ If you register a shortcut function (l 103) to the SET button, you can
change the ISO sensitivity setting from the recording screen.
Please refer to page 109.
Please refer to page 111.
The detected face is displayed in the frame.
∫ About prioritised face framing
The prioritised face frame is displayed in
yellow. When the unit is set to Portrait mode
in Intelligent Auto Mode, the unit will focus
on the prioritised face frame and adjust the
brightness accordingly.
≥ The grey frames are for face detection only.
≥ When you press the button halfway while recording still pictures,
the unit focuses on the prioritised frame. When focus is achieved, the
prioritised frame turns green.
[WHITE BALANCE]
[EXPOSURE]
[FACE CHASER]
[MENU]: # [FACE CHASER] # [(ON)]
HX-WA20EB-VQT4F67_mst.book 101 ページ ２０１２年２月１３日 月曜日 午後３時５７分
To Next Page
Loading...
