40 VQT4F67
Inserting/removing an SD card
Caution:
Check that the status indicator has gone off.
1 Open the rear door.
When using a non Panasonic SD card for the first time, or one which
was previously used on another equipment, it is necessary to format
the SD card. (l 72) When the SD card is formatted, all of the recorded
data is deleted. Once the data is deleted, it cannot be restored.
HX-WA20/HX-WA2
Status indicator A
≥ When this unit is accessing the SD card or built-in memory, the status
indicator lights up red.
1 Unlock the LOCK lever.
2 Slide the open/close lever.
3 Open the rear door.
HX-WA20EB-VQT4F67_mst.book 40 ページ ２０１２年２月１３日 月曜日 午後３時５７分
To Next Page
Loading...
