108 VQT4F67
This is for reducing the wind noise coming into the built-in microphones.
≥ This function’s default setting is [ (ON)].
≥ You may not see the full effect depending on the recording conditions.
Sets the period for which the recorded image appears on the LCD
monitor after the button is pressed.
[WIND CUT]
[MENU]: # [WIND CUT] # [ (ON)]
[AUTO REVIEW]
[MENU]: # [AUTO REVIEW] # desired setting
(1sec): Still pictures are displayed for approximately
1 second after being recorded.
(2sec): Still pictures are displayed for approximately
2 seconds after being recorded.
(OFF): Still pictures are not displayed after being recorded.
HX-WA20EB-VQT4F67_mst.book 108 ページ ２０１２年２月１３日 月曜日 午後３時５７分
To Next Page
Loading...
