Panasonic HX-DC2 - Burst Recording

VQT4F67 83
Records a sequence of still pictures at a rate of 10 per second or 1 per
second.
Use this function to record fast-moving subject.
≥ Set to Recording mode. (l 47)
1 Select the menu.
Advanced (Recording)
Burst recording
[MENU]: # [BURST] # desired setting
(16M BURST)
/
(14M BURST):
Records approximately 1 still picture every 1 second.
The unit records as you hold down the button, ending the
recording when the maximum number pictures in the burst are reached.
(3M BURST):
Records approximately 10 still pictures every 1 second.
The unit records as you hold down the button, ending the
recording when the maximum number pictures in the burst are reached.
(16M REVERSE BURST)
/
(14M REVERSE BURST):
Records approximately 1 still picture every 1 second.
The unit records as you hold down the button. On release of the
button, it stores the maximum number of pictures in the burst,
going back from the moment of release.
(3M REVERSE BURST):
Records approximately 10 still pictures every 1 second.
The unit records as you hold down the button. On release of the
button, it stores the maximum number of pictures in the burst,
going back from the moment of release.
1
HX-WA20
HX-WA2
HX-DC2
HX-WA20
HX-WA2
HX-DC2
HX-WA20EB-VQT4F67_mst.book 83 ページ ２０１２年２月１３日 月曜日 午後３時５７分