34 VQT4F67
A Status indicator
B AC adaptor
C To the AC outlet
≥ Insert the plugs as far as they will go.
1 Connect the USB cable to the AC adaptor.
≥
Check that the plug portion of the AC adaptor is not loose or misaligned.
2 Plug the AC adaptor into the AC outlet.
3 Connect the USB cable to the unit.
≥
The status indicator flashes red with a period of approximately 2 seconds
(approximately 1 second on, 1 second off), and charging begins.
It will turn off when the charging is completed.
≥ Do not use any other AC adaptors except the supplied one.
≥ Do not use any other USB cables except the supplied one.
≥ We recommend using Panasonic batteries (l 21, 35, 36, 201).
≥ If you use other batteries, we cannot guarantee the quality of this
product.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in a car exposed to direct sunlight for a
long period of time with doors and windows closed.
≥ For charging by connecting to another device, refer to page 160.
≥ If the status indicator flashes at a particularly fast or slow rate, refer to
page 190.
HX-DC2
HX-WA20EB-VQT4F67_mst.book 34 ページ ２０１２年２月１３日 月曜日 午後３時５７分
To Next Page
Loading...
