42 VQT4F67
Caution:
Check that the status indicator has gone off.
1 Open the battery/card cover.
2 Insert (remove) the SD card into (from) the card slot.
≥ Face the label side B in the direction shown in the illustration and
press it straight in as far as it will go.
≥ Press the centre of the SD card and then pull it straight out.
HX-DC2
Status indicator A
≥ When this unit is
accessing the SD card
or built-in memory, the
status indicator lights up
red.
HX-WA20EB-VQT4F67_mst.book 42 ページ ２０１２年２月１３日 月曜日 午後３時５７分
To Next Page
Loading...
