74 VQT4F67
When the SD card or built-in memory contains multiple folders, you can
select a folder for playback.
≥ Set to Playback mode. (l 47)
1 Select [PLAYBACK FOLDER] using the SET button and press
the SET button.
2 Select the folder to play back using the SET button and press
the SET button.
≥ The thumbnail screen is displayed with the first file in the selected
folder surrounded by a yellow frame.
3 Select the file to playback using the SET button and press the
SET button.
This function sets the file numbers when the card is exchanged or
formatted.
[PLAYBACK FOLDER]
[FILE NO. CONT’D]
[ON]: File numbers are retained even when the card is
exchanged or formatted.
[OFF]: File numbers are reset to start from [0001] when the
card is exchanged or formatted.
HX-WA20EB-VQT4F67_mst.book 74 ページ ２０１２年２月１３日 月曜日 午後３時５７分
To Next Page
Loading...
