102
Note: When “Smart Delegation” mode is enabled and the selected cross-point on the defined/preferred
Bus selection (PGM, PST, GROUP1, or GROUP2) is not a Scene (M/E#), such as a direct Input,
RamPlayer channel, Stills etc., the corresponding M/E (Deck-1 or Deck-2) will appear blanked/undefined
in the Control Panel as well as in Kairos Creator GUI (Pictures 4.2.1.6–4.2.1.8).
When multiple Scenes (M/E’s) need to be selectable for instant delegation, the function “Source Options”
within “Module Settings” in Parameter View is used for that.
Similar to the already described functionality in section “3.2.2 Source Options,” starting on page 21 in
this manual, the “Source Options” operations for Scene delegations are almost equally identical.
To Next Page
Loading...
