Panasonic KAIROS - 3.3.9 Setup Tab Selection; 3.3.9.1 System Settings

84
Entering the “Edit” dialog from the right mouse click context menu on an IP-command:
There are 2 different “Protocol”-types
to select from: “TCP & UDP.” After
editing the necessary entries (Port,
Server, & Command), the dialog can
be confirmed and closed with “OK.”
Changes in the “Command” field
need to be confirmed by “save”
before use. Again, the “Send” button
allows you to send the entered
command (probably for testing)
before closing the dialog. Selecting
“Cancel” brings up a pop-up window
containing the selections for “Save,”
“Discard,” & “Cancel” the action, as
described on previous page (page 83,
Picture 3.3.8.3.5).
3.3.9 Setup Tab Selection
3.3.9.1 System Settings
Multiviewer Resolutions can be adjusted separately from the AUX-Outputs.
The “System Frequency” determines the overall processed system framerate,
applied to all Video-Outputs, including connected Multiviewer. However, every
Output provides individual selectable framerates.
Note: This “System Frequency” is independent from the PTP synchronization and Video-Inputs.
Picture 3.3.8.3.3
Picture 3.3.8.3.4
System Settings
Picture 3.3.9.1.1
Picture 3.3.9.1.2
Picture 3.3.9.1.3
Picture 3.3.9.1.4
The “System” drop-
down menu provides
“Reboot” & “Shutdown”
capabilities for Kairos-
Core.