Panasonic KAIROS - Naming Convention

8
1.3 Naming Convention
• Production
=
Stored file containing all production-related information including:
• Input/output settings (except IP
addresses and Type SDI,
NDI, Stream, Format).
• All Control Panel and GUI settings.
• Multi-Viewer Layouts & Presets, Live View.
• Effects, Color Correction.
• Macros.
• Ram Player, Clip Player, Stills.
• Environment
=
All engineering settings such as:
• Input/Output (IP addresses and Type SDI, NDI, Stream,
Format).
• Ram Player
=
Uncompressed file-based Clip Player.
• Clip Player
=
File-based “visually lossless” Clip Player.
• Stills
=
File-based Still Store.
• FX-Input
=
Inputs that can contain pre-processed attributes (DVE, Color
Correction, pre-processed Key, etc.). Source for FX-Input can be
derived from a Physical Input or any other internal Source like Ram
Player, Clip Player, Stills, etc.
• AUX
=
Programmable Output section.
• Live View
=
Multi-Viewer Monitoring in GUI.
• Layer
=
A Layer is treated like a generic Keyer for the purpose of
compositing, but a layer differs from a Keyer in that it can contain
multiple combinations of attributes—even of the same type—such
as Luminance- and Chroma-keys, Masks, Wipes, DVE’s, Color
Corrections, etc. (see section 1.2.3 Layer).
• Source Options
=
Individual available Sources per Bus & Scene.
• Scene
=
see section 1.2.2 Scene.
• Clean-Feed
=
Every Layer within any Scene level, even when re-entered through
multiple other M/E’s, has its individual (forwarded) attribute/flag
declaring whether it is visible or not on any designated Output.
Unlike a generic M/E architecture, it’s no longer an M/E by M/E
setting, which was restricted by the number of available output
cascades per M/E. KAIROS automatically selects the “correct”
output cascade (A/B/C/D/…) in order to maintain the overall Clean-
Feed rules.