Panasonic KAIROS - 3.3.8.3 Triggers

82
Selecting an Input with a PTZ-Camera connected will enable these additional controls:
Picture 3.3.8.2.7
Selected device type is PTZ .
The right mouse click context menu allows for selected item to “Recall preset,” “Set preset” (store
preset), “Delete preset,” or “Rename preset.”
3.3.8.3 Triggers
Picture 3.3.8.3.1
The “Triggers” selection within the “Config”-tab allows to create commands (Http or IP) in order to
address specific functionality on connected network devices, for example, Robotics, Intercom, etc.
Creating a “New Directory…” is also available in order to help organize individual categories of
commands and/or controlled devices (e.g., groups of Robots, PTZ’s, Video Servers, etc.).
Note: Functions in the “Edit” drop-down menu or right mouse click context menu are disabled when
there’s no existing object (e.g., “Directory,” IP-Command, or HTTP-Command) which could be affected.
Right mouse click
context menu.
Available
PTZ
Camera
Presets.
Use left
mouse
click to
select.
Pan, Tilt, Zoom controls with adjustable Speed response & Power status.
Right mouse click
context menu.