96
3.4.3 AUX-Delegation
The “AUX Delegation” selection is providing the controls for AUX-buses in a X/Y style so that the upper
Bus is used to select a specific AUX-bus and the lower bus is providing the individual available source.
Again, when there are more sources (see section 3.2.2 Source Options page 21) than source buttons
available, automatically a “Shift”-level is (or multiple “Shift”-levels are) applied to the far-right side of the
source selection buttons.
3.4.4 Inputs (Tally Indication)
Selecting the tab “Inputs” will show a list of all available external inputs with their designated “Tally”
signalization. In this example, Red-Tally (On-Air/PGM-1) for Input-1, Yellow-Tally (Preview/Preset) for
Input-2, Cyan-Tally (PGM-2) for Input-11, Blue-Tally (PGM-3) for Input-17, Magenta-Tally (PGM-4) for
Input-21 and Green-Tally (PGM-5) for Input-31.
3.4.5 Macros
The “Macro” tab contains all recorded “Global”-Macros for instant recall.
3.4.6 Multiviewer
When selecting the “Multiviewer” tab, a list of all Factory Presets and all User-defined Presets are
displayed and can be directly applied to Multiviewer 1 and/or 2.
To Next Page
Loading...
