97
3.4.7 Scenes
The last tab called “Scenes” provides full cross-point control per Bus/Layer on delegated Scene. There
is no Scene selected when entering this tab (Picture 3.4.7.1).
Scene “Main” delegated (Picture 3.4.7.2). Background A & B + 2 Layers.
Scene “ME1” delegated (Picture 3.4.7.3). Background A & B + 4 Layers.
Note: Also in “Scenes” tab—once a Scene is delegated—when there are more sources than source
buttons available (see section 3.2.2 Source Options, page 21), automatically a “Shift”-level is (or multiple
“Shift”-levels are) applied to the far-right side of the source selection buttons.
To Next Page
Loading...
