Panasonic KAIROS - 3.3.1.3 Deck A;Deck B

25
3.3.1.3 Deck A/Deck B
When the Mixer/Control page is active,
the “Deck A” and “Deck B” tabs appear
on the menu bar that contain tools to
delegate resources to each control
“Deck.” Deck B is on top and Deck A is
the bottom one. Use [ALT]+A and
[ALT]+B to open these menus.
Click “Delegate…” to open a Selection window with all the Scene
Directories and Scenes, which are available to be delegated to
this Deck. Directories cannot be delegated, but Scenes within
them can be selected.
Note: “Smart Delegation” is only available for the “Deck B” drop-down menu. This selects a special
“Auto Delegation” mode for the GUI/Mixer/Control menu page. When “Smart Delegation” is enabled, the
choices are Preview or
Program. The selection
will be used to “unfold” a
selected Scene from
Deck-A PVW or PGM bus
to be delegated to Deck-B.
For more detailed information, refer to section 4.2.1 Smart Delegation in this manual.
Picture 3.3.1.3.1
Picture 3.3.1.3.4
Picture 3.3.1.3.2
Picture 3.3.1.3.3
Picture 3.3.1.3.5
Picture 3.3.1.3.6
Picture 3.3.1.3.7
Picture 3.3.1.3.8
Picture 3.3.1.3.9