Panasonic KAIROS - 4.2.1 Smart Delegation

101
4.2.1 Smart Delegation
Using the right mouse-click context menu on either “Deck-1” or “Deck-2”(left) and select “Set
Delegation”, or click on the “
” symbol next to “Scene” in “Module Settings” (right), will open the
“Source selection” window in order to delegate a static Scene per Deck-1 and/or -2 (Picture 4.2.5).
Picture 4.2.5
Picture 4.2.1.1
Picture 4.2.1.2
Picture 4.2.9
As long as “Smart Delegation” is
“disabled,” the Modules “Deck
-1 & -
2”
(Picture 4.2.1.1) will show the
delegated Scenes. The “Module
Settings” in the “Parameter View” is
also reflecting this (Picture 4.2.1.2).
Clicking the “Pen” symbol next to
“Smart delegation” opens the available
selections for the corresponding
Control Panel M/E (PGM, PST,
GROUP1, & GROUP2). Selection is
“PST” from the lower M/E (Deck
-1).
After enabling and defining “Smart Delegation” for Deck-2 with PST-Bus from Deck-1, the menu will
update accordingly (Pictures 4.2.1.3
–4.2.1.5).
Picture 4.2.1.4
Picture 4.2.1.3