95
3.4 KAIROS Rest API
3.4.1 Rest API Overview
In order to access and control KAIROS via a generic Web-browser, such as Chrome, Edge, etc., the
implemented Rest API can be used. Typical browser shortcuts can be used as well (e.g., F5=refresh,
F11=Fullscreen, etc.). For details, check the corresponding browser command information.
3.4.2 AUX-All
When selecting (mouse-click) the item “AUX” (Picture 3.4.1.1 above), the browser is showing all
available Aux buses. Scroll up and down to navigate. Select any cross-point on any designated output
(Aux). When there are more sources than source buttons available (see section 3.2.2 Source Options
page 21), automatically a “Shift”-level is (or multiple “Shift”-levels are) applied to the far-right side of the
source selection buttons.
Designate output (AUX) Available sources per AUX Shift levels per source selection
Type in the IP-address and Port-number (in this case, “192.168.40.40” for the IP-address and
adding the Port-
number “:1234”) and start browsing. For the upcoming dialog, the “User”
(Kairos) and “Password” need to be entered. For the “Password,” the connected Server-
System-Id is required. For details, see section “3.3.1.4 Help” in this manual.
To Next Page
Loading...
