Panasonic KAIROS - Page 121

121
Note: Kairos will remember the last delegated Joystick control per selected Layer. To disable Joystick
control, deselect the Transform control (Crop, Trans2D, etc.), the selected Layer or the entire main
selection for “FxInputs,” “PTZ,” “Scene,” etc.
Picture 4.7.5
Picture 4.7.6
Picture 4.7.7
Picture 4.7.8
“Layer-1” in Scene “Kairos”
is selected and highlighted
in Joystick delegation
section.
Scene “Kairos” is selected
and highlighted in Joystick
delegation section.
Scene “Kairos” is selected
and highlighted in Joystick
delegation section.
“Layer-1” in Scene “Kairos”
is selected and highlighted
in Joystick delegation
section.
Delegation enabled for
“Layer-1”—
“Trans2D”
Joystick controls.
Joystick delegation shows
available Transforms for
“Layer-1” (Crop & Trans2D).
The right Joystick button acts like an acceleration button for all Joystick
control axis and assigned function, such as Transform2D, Crop, etc.
No function implemented yet on the left Joystick button.
Picture 4.7.9