19
Finally, the main task appears:
To change the upcoming
selection “Yes/No,” use
the Keyboard cursor
buttons Up/Down. For
selecting “Ok/Cancel,”
the Keyboard cursor
buttons “Left/Right” are
used. The “Return or
Enter” Keyboard buttons
will confirm the selection.
Continue with “Yes” and “OK” (Picture 2.3.8).
In this dialog, LAN
adaptor 1 or 2 can be
selected. After confirming
the selected adaptor, the
next upcoming box allows
to enter an IP address
using the connected
Keyboard.
When finished, confirm “OK.”
After entering the IP
address and hitting “OK,”
the next 2 dialogs will
handle the according
“Netmask” & “Default
Gateway” settings.
After confirming “OK” for the Netmask and Gateway, the final
screen is used to “Apply” the new settings. Use the Keyboard
cursor buttons to select “Apply” and confirm with “OK.” This will
use the new IP-settings and continue to boot KAIROS software.
“Cancel” will ignore the changes and boot KAIROS with the
network settings before this “Network Configuration” task was
started.
To Next Page
Loading...
