60
Note: For more details regarding Audio controls in general, such as “Shuffle, Gain & Audio Delay, Audio
Generators, etc.” please refer to section “3.3.3.5 Audio Mixer” in this manual, starting on page 47.
In order to set an “Audio source” for a Kairos Core Multiviewer Output (DP/HDMI), click the “ ” symbol
in “Multiviewer Settings” at the top of the “Parameter View” panel next to the “Audio source
(scene “Main” is selected in this example) to open the overlay window for this
available “Audio sources.” The selection contains all exist
ing “Scenes,” “Inputs,” “FxInputs,”
“ClipPlayers,” a configurable “AudioMixer,” and “Audio Generators.”
The speaker symbol
is visualizing the Audio
source, selected for this
Multiviewer DP/HDMI
output.
To Next Page
Loading...
