69
Here is an example with multiple directories of FX-Inputs:
Note: In order to apply any modifications/effects to an FX-Input, use the same controls as previously
described in section “3.3.3.2 Scenes” starting on Page 29 of this manual.
Created FX-Inputs in their designated directories.
The “Move Up” & “Move Down” controls, which are used
to change the order of FX-Inputs within a directory, can
be found in the right-click context window.
Main “FX-Inputs” directory.
Subdirectories within “FX-Inputs.”
To Next Page
Loading...
