86
For all needed Network adaptors or interfaces, the IP address, Netmask, and Gateway (if necessary)
need to be entered in order to function properly.
Note:
- Network adapter settings are not part of “export/import environment file” operations in the Kairos
Creator “Settings” drop-down menu! See section “3.3.1.2 Settings” on page 24 in this manual for details.
- The QSFP28-2 function is not supported yet.
Enables or disables the individual Network-Adaptors using the designated check box .
“LAN1”: Onboard wired network adapter 1 (1 Gb-Lan) –
“LAN2”: Onboard wired network adapter 2 (1 Gb-Lan) – Disabled
“QSFP1”: High-speed Network interface 1 (100 Gb-Lan) – Enabled
Common
Network
Settings
To Next Page
Loading...
